CMT C707 Flush Trim Bit for Laminate - D12,7x12,7 S=6 HW
CMT C707 Flush Trim Bit for Laminate - D12,7x12,7 S=6 HWCMT C707 Flush Trim Bit for Laminate - D12,7x12,7 S=6 HWCMT C707 Flush Trim Bit for Laminate - D12,7x12,7 S=6 HW

CMT C707 Flush Trim Bit for Laminate - D12,7x12,7 S=6 HW


List price
32.85 €
39.42 € incl. VAT

Quantity discount
5% /From 10 pcs

Availability on stores
Prague Warehouse
3 pcs

Order Code
C70712811


• Large guiding surface.• Unstuckable bearing.• Non-scratch surface.3 in 1 new flush trim bits with 'Delrin' triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops. 1) The anti-stick properties o... The whole description
51


3 pcs
32.85 €
39.42 € incl. VAT
3 pcs
32.85 €
39.42 € incl. VAT
Out of stock
41.66 €
49.99 € incl. VAT
3 pcs
41.66 €
49.99 € incl. VAT

• Large guiding surface.
• Unstuckable bearing.
• Non-scratch surface.


3 in 1 new flush trim bits with 'Delrin' triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops. 1) The anti-stick properties of the 'Delrin' bearing greatly reduces the likelihood of the bearing getting stuck when working with glue. 2) The extended guiding surface of the new 'Delrin' bearing is perfect for your work as it doesn't scratch the surface like a steel bearing. 'The Delrin' bearing also guarantees maximum stability. 3) The shear angle cutting edge allows for better chip removal.


Shank6 mm
Cutting diameter12,7 mm
Cutting height12,7 mm
Total length54,2 mm
Bearing Delrin, Triangular - D12,7 d4,76 B5,8
Order Code: C79104200
15.61 €
18.73 € incl. VAT
Shield for Bearing - 9,5mm, D9 x d4,75 x t0,9mm
Order Code: F099-42200
0.88 €
1.06 € incl. VAT
Bearing Delrin, Triangular - D19 d4,76 B7
Order Code: C79104300
15.61 €
18.73 € incl. VAT
Shield for Bearing - 12,7mm, D12 x d4,75 x t0,9mm
Order Code: F099-42300
0.52 €
0.62 € incl. VAT
Hex key - 2,4mm (3-32) CMT
Order Code: C99105700
5.59 €
6.71 € incl. VAT
Download documents
  • No documents
Download documents
  • No documents
You could be interested in the following
CMT Trim Bit for Holes - D6x18 L70 S=6 Z1+1 HW

• Unique time-saving bit• Trims on the upper and lower side ...

29.22 €
upon order
Order Code: C71606111
CMT C906 Flush Trim Bit, Slanting Teeth - D19x25,4 2xB19 S=12 HW

• Negative angle of cutting edge.• For trimming even the mos...

47.69 €
upon order
Order Code: C90669111B
CMT C806 Flush Trim Bit, Slanting Teeth Up & Downcut Spiral HW - D19x50,8 B19 S=12,7
77.26 €
upon order
Order Code: C80669041B
CMT C916 Panel pilot Bit - D8x19 L64 S=8 Z1 HW

• Unique time-saving bit• Trims on the upper and lower side ...

21.99 €
IN STOCK: 8 pcs
Order Code: C91608011