IGM LAGUNA Bed Extension 500mm for Revo 1836-2436

• Extension on the spindle or tailstock side by 500 mm.
• Allows turning diameters over 460 mm outside the bed.
• The extension can be mounted in up to 5 different positions, even perpendicular to the bed.

The bed extension up to 500 mm is supplied with a cast iron square block for lifting the tailstock and with an extension for toolrest. By mounting the extension in the lower positions under the bed, it allows turning of large diameters, for example for bowl machining.

Supplied with:
• Bed extension 500 mm
• Cast iron block for lifting of the tailstock
• Extension for toolrest