Back to articles

Sawing of All Materials with Just One Blade

Kotouč na všechny materiály

The Diamond of Blades


NOISELESS

Thanks the new minimization of gullets design this blade succeeded in reducing the noise of idling by up to 15 dB(A) compared to conventional carbide saw blades. With a noise level of just around 70dB(A) when idling, the wearing of hearing protection is outdated.

Odhlučněný kotouč

ALL-AROUND

New industry standard with universal application in countless materials and suitable for all chop saws and portable machines, table and vertical panel sizing saws, CNCs and through-feed installations.

Odhlučněný kotouč

QUALITY

The special hollow back tooth configuration (HR) guarantees an excellent cutting quality.

Odhlučněný kotouč

FAST

The teeth are surprisingly thin! The cutting width is a mere 2,5 mm and they generate noticeably lower cutting pressure and therefore also require less power during usage. Resharpenable max 2 times.


Odhlučněný kotouč

LIFETIME

The lifetime is 20X longer than carbide blades thanks to the diamond tips.

Odhlučněný kotouč

Universal diamond blade for cutting these materials:


Wooden Materials:

Planed product
Jointed mat
Glulam®
Quality
laminated timber
Glued
timber panels
Oak
Beech
Larch
Bangkirai
Coconut
Spruce
Poplar
Balsa
Ash
Fir
Cork
Floor paneling
Solid wood panel

Beams
Battens

Plywood Materials:

Veneered
laminated wood
Plywood
Multiplex
Wood core plywood

Chipboard:

Rough particleboard
OSB / Chipboard

Fibre Panels:

Lacquered
MDF profile
Soft fiberboard
Raw MDF
Double panel
Lacquered
MDF Profile
Hard fiber panel
Honeycomb panel

High-gloss
film particleboard
Lacquered MDF

Laminated Materials:

CPL-laminated acoustic particleboard
HPL laminate

Melamine laminated particleboard
HPL laminated particleboard

ALU and PVC:

Wood PMMA
Hollow Alu profile
Alu
honeycomb panel
Alu Foam
PS (Polystyrene)
PET honeycomb core
GFK grid
Polyethylene

Mineral Bonded Materials:

Wood fiber
Gypsum
fiberboard veneer
Gypsum plasterboard

Gypsum fiberboard
Gypsum
fiberboard with MDF
Fibercement board
Mineral wool/clay

Recommended Use

Bezpečnost s rozvíracím klínem

We recommend the use of the splitting wedge with thickness between 2,0 and 2,4mm.

Longer Lifetime Thanks to Diamond Tips

Ćištění kotouče

Clean your circolar saw blades on a regular basis. You will profit from a long-lasting and precise cutting quality and maximize the lifetime of your innovative saw blades many timer over. The easiest solution is a professional CMT Tools Cleaner Emulsion.




Upozornění

It is not recommended to use the saw blades for longitudinal cuts in soft wood and material thicknesses of more than 40mm. Do not cut materials with nails, stone and metal parts. Chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade.



Related products

NEW

FREE SHIPPING

CMT Xtreme Diamond Multi-Material Saw Blade - D300x2,5 d30 Z44
391.40 €
473.59 € incl. VAT
Order Code: C23530044M

NEW

FREE SHIPPING

CMT Xtreme Diamond Multi-Material Saw Blade - D190x2,5 d30 Z24
225.50 €
272.86 € incl. VAT
Order Code: C23519024M

NEW

FREE SHIPPING

CMT Xtreme Diamond Multi-Material Saw Blade - D216x2,5 d30 Z30
281.90 €
341.10 € incl. VAT
Order Code: C23521630M

Back to articles